SAB Goblin 380 Helicopter Red/Black Kit

$316.00

SAB Goblin 380 Helicopter Red/Black Kit

Available on backorder

SKU: g380r Category:

Description

General Specifications:

  • Main rotor diameter: 856 mm
  • Main blade length: 380mm
  • Tail rotor diameter: 196 mm
  • Tail blade length: 70 mm
  • Main shaft diameter: 8 mm
  • Tail shaft diameter: 5 mm
  • Weight including electronics: 1075 g (excluding batteries).

 

Kit Includes:
  • 21T motor pulley (other motor pulleys available)
  • BL 380 3D mm main blades
  • 70 mm tail blades
  • 2x  Battery tray with straps and double tape
 
Suggest electronics (not include):
  • Cyclic Servos: Micro size 23mm
    • General and 3D flight:  MKS DS92A+,  Savox SH-0255MG, KST 215MG
    • General and Extreme flight:  BK 3001HV,  SAVOX SV-1232MG,  MKS HV93,  MKS DS95, KST MS325
  • Tail Servo: Mini size 35 mm
    • General and 3D flight:  Savox SH-1257MG,  Futaba S9257
    • General and Extreme flight:  BK 5005HV,  MKS HV9780, KST MS565
  • Typical speed controller:
    • General and 3D flight: Kontronik Koby70, YGE 60 LV, CC Lite 75
    • General and Extreme flight:  Kontronik Koby90 – Jive 80LV ,  YGE 90 LV,  CC Lite 100
  • Maximum motor size: 41 mm diameter, 41 mm height
    • General and 3D flight: X-Nova 2820-890,  Scorpion HK 3014-900,  Quantum 2820-880
    • General and Extreme flight:
      • Kontronik Pyro 380-9,  X-Nova 3215-930,
      • Scorpion HK 3020-1000,  KDE 500XF-950.
  • Battery compartment: 44x44x130mm
    •  6S 1500/2600 mAh.  For perfect 3D flight 6S-1800 mAhThe following motor pulleys are available:

The follo

  • H0501-19-S – 19T Pinion = ratio 6.3:1
  • H0501-20-S – 20T Pinion = ratio 6:1
  • H0501-21-S – 21T Pinion = ratio 5.7:1
  • H0501-22-S – 22T Pinion = ratio 5.5:1
  • H0501-23-S – 23T Pinion = ratio 5.2:1
  • H0501-24-S – 24T Pinion = ratio 5:1wing motor pulleys are available:

All these motor pulleys are for a 6 mm motor shaft. Each pulley includes an adapter for 5 mm motor shafts.

Key Features:
Goblin Concept design.

Single stage transmission;

Heat tolerant primary drive belt;

Motor Belt Gates GT3 9 mm.

HPS (High Precision Head System);

8mm high strength steel main shaft;

5mm high strength steel spindle shaft;

New head with 2-piece blade grip preserves grips in the event of a crash.

Direct and geometrically correct servo placement;

Mini size cyclic servos.

Quick release battery tray system

Big battery compartment;

Wide selection of batteries with different capacities 6S 1500/2600 mAh.

Mini size tail servo.

Aluminum Motor mount.

Plenty of room for electronic components.

Very clean Cabling.

Dampened tail system for increased vibration tolerance;

Aluminum tail case for increased stiffness.

5mm high strength Tail shaft

Carbon fiber tail push rod hidden inside the boom for an aesthetically pleasing, unique design.

All Goblins are shipped directly from the official USA distributor.